'FLIP'
for assembly
Diagonal holes
'DOWN'
Diagonal holes
'DOWN'
NOTE: These diagonal holes indicate
front of the 'H' frame.
10
K
7/8"
1"
7
50/50 Split Top Ranger Table
1. Position the 'H' Frame (10) with the diagonal holes
toward the FRONT AND DOWN. Position each
Support Channel (9) with the 7/8" notch toward the
front. Attach the Support Channels (9) to the 'H'
Frame (10) using #10-32 x 1/2 Screws (K) through
the lower set of slots.
Position the Drawer Panel Cover (11) with the offset
"DOWN" and toward the front. Position the flange
"UP" and toward the rear. Attach the cover using 6
screws (K).
X204
PPHTC
#10-32 x 1/2"
12
K
10
9
9
11
9
K
7/8"
