D
2
V120A
LIFT ASSEMBLY
X140A
PTHSMS #8 x 5/8"
F
10
X191
PFHTC
#10-32 x 1/2"
4
J
N
6
P
2
X11
PAN HEAD SCREW
#10 x 3/4 "
D10
RUBBER
BUMPER
15
5"
4"
18"
6
N
D
J
7
N
F
N P
8
19. Attach Lift Assembly (D) to the 'H' Frame
cross rail with #10-32 x 1/2 Flat Head Screws (J).
20. Install the Tilt Top (7) onto the table. Raise
the Lift Assembly and align the holes in the lift
with the holes in the top. Attach with #10 x 3/4
Particle Board Screws (N).
21. Attach the Reference Top (6) to the base with
#10 x 3/4 Particle Board Screws (N) through the
front and rear rail and through the side rail
flange.
22. Attach Dust Cover (8) to base with #8 x 5/8
Screws (F).
23. Attach Top Bumpers (P) to Dust Cover with
#10 x 3/4 Screw (N). Position approximately as
shown. Measured from edges of dust cover.
24. Install assembled Tool and Reference
drawers into table if so equipped.
50/50 Split Top Ranger Table
R
I922 9-16 REV.2
