34
7 Malfunctions
To prevent damage to the machine as well as injuries while
eliminating malfunctions at the machine, it is necessary to
comply with the following points:
•
Eliminate a malfunction only if you have the qualification
specified to do so.
•
Also read section "General Safety Instructions".
•
When eliminating malfunctions at the machine, the
following special dangers have to be expected:
•
Accidentally switching on the power sources can result in
injuries to people as well as damage to the machine.
•
In case of unprotected manual operation, there is an
increased risk of injuries through bruising.
1 Behaviour in case of malfunctions
If any malfunctions occur while the machine is in operation,
proceed as follows:
1. Stop the machine either using the STOP button or
EMERGENCY SHUT-OFF, depending on the situation.
2. When necessary for the safety of people or of the machine,
immediately cut off the machine from the power system it
has.
2. Troubleshooting > If necessary, then by qualified personnel
3. Error correction > If necessary, then by qualified personnel
4. Start up the machine.
