21
2 b Starting the machine without Touchscreen for the first time
The machine shall be checked as per the following:
a)
Be sure that no foreign materials, such as tools or
similar, are left in the soil hopper, in the elevator or
on the turntable.
b)
Put the main switch of the machine to OFF
(„Null”)
position before the plug of the connection cable is
connected to the socket.
c)
When the machine is connected to the electricity,
put the switch to „1 ON” position.
d)
Prior to starting, connect compressed air (6 to 8
bars).
Put switch of turntable
to „1 ON” position, while
switch of elevator and conveyor belt to right to
position „1”, as well as switch of drill to position „2”.
Press pushbutton „Start” on „Start-Stop” switch of
swinging cable and the turntable starts to rotate
counter clockwise.
If it would rotate clockwise then call for an
electrician to change phases at the connecting
cable.
Plates of the elevator shall be forwarded from
bottom towards top seeing from side of soil hopper.
Care shall be taken on the following:
Wi
th the potentiometer, “Soil” means:
•
turn to the right
> larger amount of soil and more speed
•
turn to the left
> smaller amount of soil and less speed
Warning!
•
Switch position to right: elevator and conveyor
belt are moved in normal operational direction.
•
Switch position to left: conveyor belt is moved in
normal operational direction while elevator is
moved in opposite direction.
Changeover switch „Drill” ("Bohrer"):
•
switch position „2”: drill is rotated clockwise
> it excavates the soil.
•
switch
position „1”: drill is rotated counter-
clockwise > it compacts the soil.
(only possible with standard drill)
e)
In case there were no problems found or unusual
noises heard during test operation, the machine
may be put into operation as it is described in
section „Operation”.
