24
c) Soil feeding and emptying the machine
The soil hopper contains up to 4 cubic meter substrate and can
be fed in various ways without the work flow at the machine
being disturbed or interrupted.
Feeding can take place:
•
using a conveyor belt
•
using a shovel loader
•
usind a bale breaker machine
•
using a soil mixer machine
•
using a potting machine
The remaining soil can be conveyed out of the machine by
opening the soil flaps.
d) Adjusting drill depth and pressure intensity of plates
After the size of the soil drill and the plate matching it are fixed,
the drilling depth must be set according to the bale’s height of
the product to be potted.
During this, proceed as follows:
•
Screw on plates to the holding-down bars using self-locking
nuts.
•
Set the drilling slide to lower position
