6. Lock
Indicates the "Key Lock" feature has been activated.
7. Beep
Indicates that "Beep" tone confirmation is on.
8. Bell
Indicates that "Bell" feature has been activated.
9. Memory channel Indicator
Display the memorized channel number.
10. d2 (Dot No. 2)
This dot is used to display the "CTCSS" Frequency. (Unit : Hz)
11. d1 (Dot No. 1)
This dot is used to display the RX or TX Frequency. (Unit : MHz)
12. Channel(Frequency) Indicator
Display the channel No. or Frequency No.
13. Signal strength indicator
The radio incorporates a tenth segment incoming signal and power
output meter in the LCD. When receiving a signal, the meter will
indicate how strong the signal is. A week signal will be indicated by
one or two segments, while a very strong signal will have 8 to 10
segments. When transmitting, the letter "TX" will appear on the LCD
and 10 segments will appear on the LCD.
14. Battery remainder level meter
If you want see the battery level when you press the "PTT" button,
press the monitor button with PTT button.
15. Battery
Indicates batteries are getting low. If the battery level is lower than
the standard point, Battery Level Indicator will twinkle.
