Display of Memory channel Scan On/Off condition re-setting
- Press the " or button, the memory channel scan skip
On/Off will toggle.
- Press the "PTT or MR" button to store the changed contents.
NB : - If you press the "FUNC+ or " button, the radio will
return to stored TX/RX channel number re-setting mode.
- If you press the "FUNC" button over than two seconds, the
stored channel will delete and the radio will return to normal
operation.
2) MW(Memory Channel Writing) Button
To store the channels in the memory locations ;
- Press the "MR" button.
- Select the memory location by using " or button.
- Press the "MR" button to return to the normal operation
- Select the channel you want to store by using " or " button.
- Fix the CTCSS Tone On/Off, CTCSS Tone Frequency.
- Press the "FUNC + MR(MW)" button.
6. SC, DW Button
1) SC(SCAN) Button
To Activate : Press the "SC" button not in the TONE Frequency
Setting Mode and Dual Watch Mode, the radio will start the
scanning process and stopping at any channel that is busy with
signals being communicated. It will remain on that channel during
scan delay time and reactivate scanning.
- If you want to stop scanning process, simply press the "PTT" button.
- During the scanning process, the skipped channel will not be
scanned.
- d1(dot 1) on the LCD will blink per 0.5 second.
