5. MR, MW Button
1) MR(Memory Channel) Button
A. TX/RX in the memory channel
To access the stored channel No. in the memory, press the
"MR" button, and then select the channel No. you want to
access by using " or " button. The stored channel
No. will appear at the 2 small segments on the LCD to
indicate that this feature is currently activated. If you press "C"
button, the radio will enter the Call channel mode.
Display of Memory channel.
To re-activate normal condition, press the "MR" button once
again, and then the used last channel No. before memory
channel mode will appear on the LCD.
To change the channels stored within a memory location ;
- Press "FUNC + MR(MW)" button, the "MR" icon and 2
signal segments on the LCD will twinkle. (If memory location
is empty, CH 1 will appear.)
Display of stored TX/RX channel number re-setting
- Press the " or button to select the RX/TX channel
No. and then press the "PTT or MR" button.
- If you want to delete the stored channel No. at the memory
location, press the "FUNC" button over than two seconds.
To Re-set the Memory channel Scan On/Off condition ;
- Press the "FUNC + or " button, the "MR" icon on the
LCD will twinkle.
12
