background image

6

Scope of Delivery

Assembly

No.

Description

Qty.

C1

Allen Screw M5x12

4

C2

Washer M5

10

C3

Washer, Plastic

2

C4

Spring Washer

2

C5

Allen Screw M5x16

2

C6

Allen Screw M5x20

4

A1

Allen Screw M10x60

4

A2

Washer M10

4

No.

Description

Qty.

A3

Spring Washer M10

4

A4

Safety Nut M10

4

B1

Allen Key 4mm

4

B2

Allen Key 5mm

1

B3

Allen Key 6mm

1

B4

Allen Key 8mm

1

B5

Phillips Screwdriver 

1

B6

Spanner

1

Carefully unpack all of the delivered items. Two people are required as some parts of your exercise equipment 

are bulky and heavy. Check that all of the fastening material (screws, nuts, etc.) and components are there 

before starting assembly.

Carefully carry out the installation as damage that has arisen due to assembly errors are not covered by the 

warranty or guarantee. Read the instructions carefully before starting, follow the sequence of installation steps 

exactly and follow the instructions for each individual step. Installation of the device must be carried out by com-

petent adults. Perform the assembly in a location that is level, clean and free from obstructions. Carry out the 

assembly with two people. Only start training after fully completing the installation.

Summary of Contents for SpeedBike SX3

































Reviews: