6
Step 3: Assembly of the Cockpit Frame
Connect the cables protruding out of the right side -frame with the cable protruding out of the right cockpit hand
rail.
Place the cockpit frame from above onto the side frames.
Carefully fix this on the inside of the side-frame using two hexagon socket screws M8x20 on each side. Tighten
these screws very carefully and not too tight so as not cause deformation to the side-frames.
CAUTION
: Make sure that the cable does not get damaged or jammed.
Step 4: Assembly of the Cockpit
Raise the cockpit upwards and insert the locking pin into the left opening on the joint between the cockpit and
the cockpit frame. Now tighten the hexagon socket screws to be found on the left and right sides of this joint.
Important Note before First use of the Treadmill
Lubricate the running belt before using the treadmill for the first time. Please read the Section “Lubrication of the
Belt” in this manual.
Assembly
Tighten this hexagon
socket screw
Tighten this hexagon
socket screw
