background image

10

The treadmill will only operate if the safety key is correctly in contact with contact point in the cockpit. The tread-

mill will stop automatically if the safety key is no longer in contact.

Before each training session make sure to attach the safety key to your clothing with the clip.

If you either want to stop the treadmill quickly, cannot keep up with the speed, or any other emergency arises, 

pull the string to remove the safety key out of the cockpit. If the safety key is connected to your clothing it will 

automatically be pulled out of the cockpit if you fall. It is therefore vital to make sure that the clip is securely 

fastened to your clothing and cannot somehow be pulled off. Adjust the length of the string to hang down loosely 

during training. 

It is not possible to operate the treadmill without the safety key being correctly inserted.

If the safety key is pulled from the contact point during training the treadmill stops automatically. The message 

“E-07” will appear in the display and a warning signal will sound.

The incline will remain in the adjusted position and can only be lowered after the safety key has been re-con

-

nected. 

Select a suitable place for your training device which when in operation leaves a free safety area behind the 

device measuring a minimum of 200 cm long and which is at least the width of the treadmill.

Furthermore, whilst training on the treadmill you will require a minimum safety area measuring 100cm wide 

down the length of each side of the treadmill. You will also require a minimum safety area which is at least the 

width of the treadmill and measures a minimum of 50cm long in front of the treadmill.

 

Stop training immediately if you realise that you cannot keep up with the pace, if you start feeling sick or if any 

other emergency arises, pull the safety key out with the string to make an emergency stop.

Hold on firmly with both hands onto the handrails and place your feet on the foot rails on each side of the tread 

belt.

If you trip during training, hold onto the handrails immediately with both hands, support yourself with your hands 

and arms on the handrails and put your feet on the foot rails on either side of the tread belt.

You should practice this several times so that you will know what to do if an emergency arises.

Wear the safety key every time you use the treadmill. Make sure that all third parties are familiar with the safety 

instructions and that they always use the safety key correctly whilst training!

Safety Key

Safety Distance 

What to do in an Emergency

Summary of Contents for RunMAXX 5.0

































Reviews: