
Digital Air Purifi er
EN
11
INTENDED USE
■
This device is intended for purifying
and ionising the ambient air.
■
The device is
not
a substitute for
adequate ventilation.
■
The device is
not
suitable for use as a
(fume) extractor hood
■
Do
not
use the device indoors where
smoky or gaseous insect repellents
have been used, or in places with
oily residues, incinerators or chemical
vapours.
■
The device is
not
designed to fi lter
carbon monoxide (CO) or radon (Rn)
gases from the air. It is not suitable as
a safety device for accidents involving
combustion and hazardous chemicals.
■
The device is suitable for a surface
area of no more than 30 m
2
. It is not
a substitute for an air-conditioning
system.
■
The device is for personal use only
and is not intended for commercial
applications.
■
Use the device only for the specifi ed
purpose and as described in the
operating instructions. Any other use
is deemed to be improper.
■
The warranty does not cover faults
caused by incorrect handling,
damage, calcifi cation or attempted
repairs. The same applies to normal
wear and tear.
SAFETY NOTICES
■
This device may be used by
children
aged 8 and over and by
people with reduced physical, sensory or mental abilities or a
lack of experience and/or knowledge if they are supervised or
have received instruction on how to use the device safely and
have understood the dangers resulting from failure to comply
with the relevant safety precautions.
■
Children
must not play with the device.
■
Cleaning and
user maintenance
must not be carried out by
children, unless they are supervised.
■
Children
younger than 8 years of age and animals must be
kept away from the device and the connecting cable.
■
The device must always be switched off and disconnected
from the mains power when left unattended and before clean-
ing it.
■
Do not make any modifi cations to the device. If the device
or the connecting cable is damaged, it must be replaced by
the manufacturer, customer service department or a similarly
qualifi ed person (e.g. specialist workshop) in order to avoid
any hazards.
09814_Inlay_DE-EN-FR-NL_A5_V1.indb 11
09814_Inlay_DE-EN-FR-NL_A5_V1.indb 11
31.07.2020 08:58:56
31.07.2020 08:58:56