EN
14
CHARGING UP THE
BATTERY
Please Note!
■
A USB mains adapter is required to
charge up the battery. Note the pow-
er supply specifications (see “Techni-
cal Data”).
■
Only charge the battery when the
charge control lamp is flashing fast.
■
When the device is connected to a
power source, it cannot be switched
on.
■
Only connect the USB mains adapter
to a properly installed plug socket.
The plug socket must also be readily
accessible after connection so that the
connection to the mains can quickly
be isolated. The mains voltage must
match the data on the rating plate of
the USB mains adapter.
■
Unwind the USB cable fully before
connecting it.
■
The device should not be charged
on a computer, because the high
charging current could damage the
computer.
If the charge control lamp (
11
) is flashing
fast, the battery is weak and should be
charged.
1. Switch off the device.
2. Plug the Micro B connector of the
USB cable (
4
) into the charging
socket (
10
) on the device and the A
connector into the socket of a USB
mains adapter (not supplied with the
device).
3. Connect the USB mains adapter to a
plug socket. The charging process be-
gins. The charge control lamp flashes
slowly while the battery is charging.
4. As soon as the charge control lamp
is permanently lit, the battery is full.
Remove the USB mains adapter from
the plug socket and remove the USB
cable from the device.
Using the Holder
The device can be placed down and
charged in the holder (
2
) that is supplied
with it. There is a slot in the bottom of the
holder for receiving the Micro B connec-
tor of the USB cable (
4
).
1. Plug the Micro B connector at the
“top” edge into the slot and push it
as far as it will go into the middle of
the holder. (
Picture C
)
2. Plug the A connector of the USB cable
into the socket of a USB mains adapt-
er (not supplied with the device).
3. Connect the mains adapter to a plug
socket.
4. Place the device in the holder and
press it down. If the Micro B connec-
tor fits in the charging socket correct-
ly, the charge control lamp (
11
) flashes
slowly and the battery is charged.
(
Picture D
)
5. As soon as the charge control lamp
is permanently lit, the battery is full.
Remove the USB mains adapter from
the plug socket.
06161_Inlay_A5_de-en-fr-nl_V1.indb 14
02.03.2020 18:19:23