background image

OPERATION OF 5 KEY WALL CONTROL

FAN

ON/OFF

Turns the fan motor ON at the last selected speed and 

OPENS the Vent Lid.  Turns the fan motor OFF and 

CLOSES Vent Lid.

Pressing this key when in AUTO mode will cause the fan to 

exit AUTO mode.

AUTO

Puts the fan in AUTOMATIC thermostat mode.  

Vent lid will automatically open and fan will turn on to cool RV 

when set temperature is reached.  Once RV is cooled down, 

fan will turn off and vent lid will close.  Thermostat is set to last 

selected temperature (memory function).  Green LED will light 

to indicate MAXXFAN is in AUTO mode.  Hold key for three (3) 

seconds to reset thermostat temperature to 78°F, use (+) & (-) 

keys to adjust set temperature up or down.  Press ON/OFF key 

to exit AUTO mode.

Adjusts the fan speed or thermostat set temperature.

When fan is on in MANUAL mode: adjusts fan speed up or 

down from 10% to 100% (10 speeds).  When fan is in AUTO 

mode: adjusts thermostat set temperature up or down by 1°F 

per key press.

OPEN/

CLOSE

OPENS and CLOSES the motorized Vent Lid.

Allows the vent lid to be open or closed with the fan motor on 

or off.  Close vent lid with fan motor running in Manual mode 

to enter Ceiling Fan Mode.

FAN

ON/OFF

OPEN/

CLOSE

AUTO

HOLD TO

SET 78°F

OPERATION GUIDE -  5 KEY WALL CONTROL

OPTIONAL FOR MAXXFAN

® 

Deluxe

 

Models 7001K • 7501K • 8001K • 8501K

11

FAN

ON/OFF

OPEN/

CLOSE

IN / OUT

AUTO

HOLD TO

SET 78°F

OPERATION OF 6 KEY WALL CONTROL

FAN

ON/OFF

Turns the fan motor ON at the last selected speed and 

OPENS the Vent Lid.  Turns the fan motor OFF and 

CLOSES Vent Lid.

Pressing this key when in AUTO mode will cause the fan to 

exit AUTO mode.

AUTO

Puts the fan in AUTOMATIC thermostat mode.  

Vent lid will automatically open and fan will turn on to cool RV 

when set temperature is reached.  Once RV is cooled down, 

fan will turn off and vent lid will close.  Thermostat is set to last 

selected temperature (memory function).  Green LED will light 

to indicate MAXXFAN is in AUTO mode.  Hold key for three (3) 

seconds to reset thermostat temperature to 78°F, use (+) & (-) 

keys to adjust set temperature up or down.  Press ON/OFF key 

to exit AUTO mode.

Adjusts the fan speed or thermostat set temperature.

When fan is on in MANUAL mode: adjusts fan speed up or 

down from 10% to 100% (10 speeds).  When fan is in AUTO 

mode: adjusts thermostat set temperature up or down by 1°F 

per key press.

OPEN/

CLOSE

OPENS and CLOSES the motorized Vent Lid.

Allows the vent lid to be open or closed with the fan motor on 

or off.  Close vent lid with fan motor running in Manual mode 

to enter Ceiling Fan Mode.

IN/OUT

Reverses fan motor for either INTAKE or EXHAUST air 

direction.

OPERATION GUIDE 6 KEY WALL CONTROL

FOR MAXXFAN

® 

Deluxe

 

Models 8700K • 8900K

OPTIONAL FOR MAXXFAN

® 

Deluxe

 

Models 7000K, 7500K, 8000K, 8500K

Summary of Contents for MAXXFAN Deluxe 5100K













Reviews: