Maxwell MW-3015 B Instruction Manual Download Page 10

10

ENGLISH

cially in the regions with “hard” water.

•  Set the steam supply control (3) to the « » 

(off) position.

•  Fill the water tank (9) till the max mark using 

the jug (13).

•  Put the iron on the base (8). Place the iron 

vertically.

•  Insert the power plug into the outlet.

•  Set the temperature control (10) to the max. 

temperature of the iron sole, the (6) indica-

tor will light up. 

•  When the sole temperature (12) reaches the 

desired temperature value, the (6) indicator 

will go out, you can start cleaning of the iron 

chamber.

•  Unplug the iron.

•  Hold the iron above the sink horizontally, set 

and hold the constant steam supply control 

(3) in the “SELF-CLEAN” position.

•  Boiling  water  together  with  scale  will  be 

throwing out from the openings in the iron 

sole (12).

•  Slightly sway the iron back and forth, until 

water goes out of the water tank (9).

•  Place the iron on the base (8) and let it cool 

down completely.

•  When the sole (12) cools down completely, 

wipe it with a dry cloth.

•  Before you take the iron for storing, make 

sure that there is no water in the water tank 

(9) and that the iron sole (12) is completely 

dry. 

CLEAN AND CARE
•  Before cleaning the iron, make sure that it is 

turned off and has cooled completely.

•  Wipe  the  iron's  outer  surface  with  a  damp 

cloth and then wipe dry.

•  Sediment on the iron sole can be removed 

with a cloth dampened in vinegar-water so-
lution.

•  After  removing  sediment,  polish  the  sole 

with a dry cloth.

•  Do  not  use  abrasive  substances  to  clean 

the sole and body of the iron.

•  Avoid touching the iron sole with sharp met-

al objects.

STORAGE
•  Turn the temperature control (10) anticlock-

wise to the “min” position, and the constant 
steam supply control to the “ ” position. 

•  Remove the plug from the socket.
•  Open  the  water  tank  lid  (2),  turn  over  the 

iron and drain any remaining water from the 
water tank (9). Close the lid (2).

•  Set  the  iron  vertically  and  allow  it  to  cool 

completely.

•  Wind the power cord.
•  Keep the unit vertically in a dry cool place, 

out of reach of children.

Delivery set
Iron– 1 pc.
Water tank – 1 pc.

TECHNICAL CHARACTERISTICS
Power supply: 220-240 V ~ 50 Hz
Maximal power consumption: 1850-2200 W

Specifications  subject  to  change  without 
prior notice.

Service life of  appliance -  3 years.

GUARANTEE 
Details  regarding  guarantee  conditions  can 
be  obtained  from  the  dealer  from  whom  the 
appliance was purchased. The bill of sale or 
receipt  must  be  produced  when  making  any 
claim under the terms of this guarantee.

This product conforms to the EMC-
Requirements  as  laid  down  by  the 
Council  Directive  89/336/EEC 
and  to  the  Law  Voltage  Regulation 
(73/23 EEC)

MW-3015.indd   10

28.11.2012   17:17:37

Summary of Contents for MW-3015 B









































Reviews: