Maxwell MW-1985 Manual Instruction Download

Page: 9 / 24

ENGLISH

add the water to the base (8) up to the mark
«MAX» (6).

•

The cooking time depends on the prod-
ucts used.

•

Before eating make sure that the food is
cooked through.

•

Remove the products from the grid (1) right
after frying; keeping products on the grid
(1) for a long time during the unit operation
can cause their burning.

–

Place the grill on a flat, stable surface away
from sources of moisture, heat and open
flame and with free access to the mains
socket.

–

Place the grill keeping at least a 20 cm gap
between the grill base and the wall and
30 cm of space above the grill.

–

Do not place and do not use the grill
near highly inflammable objects or liquids
and objects subject to thermal deforma-
tion.

–

Use the grill in places with proper ventila-
tion.

–

Make sure that the base (8) is filled with
water up to the mark «МАХ» (6).

–

Oil the grid (4) slightly and install it to the
installation place (2).

Note:

–

during cooking you can install the grid (4)
into the openings (2) in the base (8) or lift
it higher by installing the grid (4) into the
grooves (2) in the base (8).

–

Insert  the  power  plug  into  the  mains
socket, set the temperature control knob
(9)  to  the  necessary  position  (selected
by  the  user),  the  light  indicator  (10)  will
light up.

–

When the heating element (7) heats up to
the required temperature, the light indi-
cator (10) will go out and you can start
cooking.

–

Carefully put the products on the grid (4),
avoid burns by possible splashes of juice or
fat dripping from the products.

Attention!  During  the  operation  the
heating  element  (7),  the  grid  (4)  and
the  upper  part  of  the  base  (8)  heat  up
strongly;  do  not  touch  hot  surfaces  to
avoid burns.

Do not place the products on the grid (4)
and do not turn them with bare hands, use
the kitchen tools.

–

When the products are ready, remove them
from the grid (4).

–

Put the cooked products into a suitable
container.

–

When the light indicator (10) goes out, you
can continue cooking.

–

After you finish cooking, set the tempera-
ture control knob (9) to the position «MIN»
and unplug the unit.

–

Before cleaning the grill wait until it cools
down completely.

CLEANING AND CARE

–

Clean the grill after every use.

–

After you finish using the grill, switch it off
by setting the temperature control knob (9)
to the position «MIN», and unplug the unit.

–

Remove and clean the grid (4), wash the
grid with water and neutral detergent, rinse
and wipe dry.

–

Remove  the  heating  element,  make  sure
that  the  heating  element  (7)  has  cooled
down.  Wipe  the  heating  element  (7)  with  a
soft, slightly damp cloth and then wipe it dry.

–

Drain the remaining water from the base
(8), wash the base with warm water and
neutral detergent, then wipe it and let it dry.

–

Do not use abrasives, solvents or steel wool
to clean the grill.

–

Do not immerse the heating element (7),
the power cord and the power plug into
water or any other liquids.

STORAGE

•

Clean the grill before taking it away for stor-
age.

•

Keep the grill in a dry cool place out of
reach of children and disabled persons.

DELIVERY SET