9
ENGLISH
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
Before using the unit
Note:
After unit transportation or storage at low
temperature it is necessary to keep it for at least two
hours at room temperature before switching on.
•
Before using the unit, wash the blender attach-
ment (1), the whisk (9), the chopping knife
(11), the chopper bowl (10) and the measur-
ing cup (13) with warm water and a neutral
detergent.
•
Wipe the motor unit (3), whisk gear (8) and
geared lid (12) with a soft slightly damp cloth,
then wipe it dry.
Attention!
•
Do not immerse the motor unit (3), the whisk
gear (8), the geared lid (12), the power cord
and the power plug into water or any other
liquids.
•
Do not put the attachments and bowls in a
dishwashing machine.
Continuous operation time
•
Continuous operation time with the attach-
ments should not exceed 1 minute, the weight
of the products to be chopped in the mini-
chopper should not exceed 500 grams.
•
Make at least a two-minute break between
operation cycles.
Using the blender attachment
Warning:
Before assembling make sure that the
power plug is not inserted into the mains socket.
•
Insert the blender attachment (1) into the
motor unit (3) till it is fixed in the motor unit.
•
Insert the power plug into the mains socket.
•
Immerse the blender attachment (1) into the
bowl with products that you want to chop/mix;
you can use the measuring cup (13) for it.
•
To switch the blender on press and hold the
button (5). Set the required operation speed
from 1 to 17 using the control knob (6). Use
this operation mode for mixing liquid products.
•
If you press and hold the button (4), the unit
will operate at maximum rotation speed. Use
this operation mode for combined processing
of liquid and hard products.
Note
Products should be put into the bowl before the
unit is switched on. The amount of processed food
should not exceed 2/3 of the capacity of the bowl
in which the food is processed.
Before
you
start
chopping/mixing,
we
recommend to peel fruit, remove inedible parts,
such as stones, and to cut fruit into approximately
2х2 cm cubes.
•
After you finish using the unit, take the power
plug out of the mains socket and remove the
blender attachment (1), pressing the buttons (2).
Attention!
•
Do not remove the blender-attachment (1)
during unit operation.
•
To avoid damaging the blades, do not process
too hard products such as cereals, rice, spic-
es, coffee beans, cheese, frozen food.
•
If the products are difficult to process, you
may add some water.
Using the whisk
Use the whisk attachment (9) only to make cream,
biscuit dough or for mixing ready desserts.
Warning
Before assembling make sure that the power plug
is not inserted into the mains socket.
•
Insert the whisk (9) into the gear (8).
•
Insert the gear (8) into the motor unit (3) until it
is fixed in the motor unit (3).
•
Insert the power plug into the mains socket.
•
Put the whisk (9) into the bowl with products.
•
Set the required operation speed from 1 to 17
using the control knob (6).
•
To switch the blender on press and hold the
button (5). Use this operation mode for mixing
liquid products.
•
If you press and hold the button (4), the unit
will operate at maximum rotation speed.
•
After you finish using the unit, take the power
plug out of the socket, disconnect the whisk
(9) from the gear (8) and disconnect the motor
unit (3), pressing the buttons (2).
Attention!
•
Do not use the whisk (9) to make tight dough.
•
Products should be put into the bowl before
the unit is switched on.
Using the mini-chopper
The mini-chopper is used to chop meat, onion,
garlic, aromatic herbs, vegetables and fruits.
Attention!
•
Do not chop very hard products, such as nut-
megs, coffee beans and cereals.
•
The unit is suitable for crushing ice in small
quantities.
Before you start chopping:
•
remove bones, sinews and cartilage from
meat.
mw-1157.indd 9
15.07.2013 17:37:03
