Visit: www.seekerwireless.co.uk for potential software updates
Page 10
Installing Cable Entry Cover
1.
Plan your installation carefully
2.
Drill a 32mmø hole in roof
3. Prepare surface for adhesion
4. Apply sealant as shown in A,B,C
(we recommend Sikaflex-512 Caravan)*
5. Position top hat
6. Position cable entry cover
7. Wipe excess sealant with a dry cloth
Applying sealant example:
Installing Control Box
Having previously chosen a suitable location
1.
Clip the mounting brackets onto the Control Box.
2.
Place Control Box on the horizontal or vertical surface and mark the 4 holes.
3.
Depending on material drill a pilot hole or use a bradawl.
4.
Attach cables to Control Box refer to page 11 for details.
5.
Screw control box into position using 4 x No. 6 Screws.
Mounting positions:
Position the Control Box in one of the 4 ways shown left.
Make sure that the front is easily accessible.
Fitting the Control Box Brackets:
The brackets snap fit to the Control Box casing
!
!
!
= Generously apply
wet seal adhesive
!
Vehicle roof
Top hat
Hole location
tabs
Cable
32mm ø
A
B
C
Direction of travel
(front of vehicle)
