MaxTronic SS-6601E, User Manual, Page: 12 / 32

2
SS-6601E & SS-6601R SAS Disk Array Systems
1
S
y
s
te
m
R
e
q
u
ir
e
m
e
n
ts
–
VT100 Terminal Settings
Refer to the following table for a summary of VT100 terminal settings required to com-
municate with the disk array system. Refer to your system manual for instructions on
setting up the VT100 terminal settings.
Ethernet settings
SS-6601E and SS-6601R support DHCP (Dynamic Host Configuration Protocol) to get
a IP address or a default IP is 192.168.0.1; You could find it from LCD scrolling. SS-
6601E and SS-6601R had embedded CGI-based GUI (graphic user interface) manage-
ment interface that can be easily accessed through a web browser.
Item Required Setting
Connection Serial Port (COM1 or COM2)
Protocol RS232 (Asynchronous)
Baud Rate 115200
Data Bits 8
Stop Bit 1
Parity None