MaxPro MPCD12VDQF/2, User Manual

Page: 5 / 93

5
before you start working
ͻůǁĂLJƐĐŚĞĐŬƚŚĂƚƚŚĞƐƵƉƉůLJǀŽůƚ age is the same as the voltage indicated on the nameplate of the
charger
ͻ/ŶĐĂƐĞŽĨĞůĞĐƚƌŝĐĂůŽƌŵĞĐŚĂŶŝĐĂůŵĂůĨƵŶĐƚŝŽŶ͕ immediately switch off the tool or unplug charger from
power source
ͻ Maxpro can assure flawless functioning of the tool only when the correct accessories are used which can
be obtained from your Maxpro dealer
ͻhƐĞŽŶůLJĂĐĐĞƐƐŽƌŝĞƐǁŝƚŚĂŶĂůůŽǁĂďůĞƐƉĞĞĚŵĂƚĐŚŝŶŐ at least the highest no-load speed of the tool
ͻdŚĞƚŽŽůͬĐŚĂƌŐĞƌŝƐŶŽƚŝŶƚĞŶĚĞĚĨŽƌƵƐĞďLJƉĞƌƐŽŶƐ (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the tool/charger by a person responsible for their safety
ͻŶƐƵƌĞƚŚĂƚĐŚŝůĚƌĞŶĚŽŶŽƚƉů ay with the tool/charger
ͻ Secure the work piece (a work piece clamped with clamping devices or in a vice is held more securely
than by hand)
ͻ Hold the power tool only by the insulated gripping surfaces when performing an operation where the
accessory may contact hidden wiring or its own power cord (contact with a “live” wire will also make
exposed metal parts of the power tool “live” and shock the operator)
ͻ Use suitable detectors to find hidden utility lines or call the local utility company for assistance (contact
with electric lines can lead to fire or electrical shock; damaging a gas line can result in an explosion;
penetrating a water pipe will cause property damage or an electrical shock)
ͻ Do not work materials containing asbestos (asbestos is considered carcinogenic)
ͻƵƐƚĨƌŽŵŵĂƚĞƌŝĂůƐƵĐŚĂƐƉĂŝŶƚĐŽŶƚĂŝŶŝŶŐůĞĂĚ͕ƐŽŵĞ wood species, minerals and metal may be
harmful (contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to
the operator or bystanders);
wear a dust mask and work with a dust extraction device when connectable
ͻĞƌ tain kinds of dust are classified as carcinogenic (such as oak and beech dust) especially in conjunction
with additives for wood conditioning; wear a dust mask and work with a dust extraction device when
connectable
ͻ&ŽůůŽǁƚŚĞĚƵƐƚ -related national requirements for the materials you want to work with
ͻŶƐƵƌĞƚŚĂƚƐǁŝƚĐŚŝƐŝŶƚŚĞŵŝĚĚůĞ;ůŽĐŬŝŶŐͿ position before making any adjustments or changing
accessories as well as when carrying or storing the tool
CHARGING/BATTERIES
ͻŚĂƌŐĞďĂƚƚĞƌLJŽŶůLJǁŝƚŚƚŚĞĐŚĂƌŐĞƌƚŚĂƚŝƐƐƵƉƉůŝĞĚ with the tool
ͻŽŶŽƚƚŽƵĐŚƚŚĞĐŽŶƚĂĐƚƐŝŶƚŚĞĐŚĂƌŐĞƌ
ͻŽŶŽƚĞdžƉŽƐĞƚŽŽůͬĐŚĂƌŐĞƌͬďĂƚƚĞƌLJƚŽƌĂŝŶ
ͻŽŶŽƚĐŚĂƌŐĞďĂƚƚĞƌLJŝŶĚĂŵƉŽƌǁĞƚĞŶǀŝƌŽŶŵĞŶƚƐ
ͻ Store tool/charger/battery in locations where temperature will not exceed 50°C or drop below 0°C
ͻŽŶŽƚƵƐĞĐŚĂƌŐĞƌǁŚĞŶĚĂŵĂŐĞĚ͖ƚĂŬĞŝƚƚŽŽŶĞŽĨƚŚĞ officially registered Maxpro Service Stations for
a safety check
ͻŽŶŽƚƵƐĞĐŚĂƌŐĞƌǁŚĞŶĐŽƌĚŽƌƉůƵ g is damaged; cord or plug should be replaced immediately at one of
the officially registered Maxpro Service Stations
ͻŽŶŽƚƵƐĞďĂƚƚĞƌLJǁŚĞŶĚĂŵĂŐĞĚ͖ŝƚƐŚŽƵůĚďĞ replaced immediately
ͻŽŶŽƚĚŝƐĂƐƐĞŵďůĞĐŚĂƌŐĞƌŽƌďĂƚƚĞƌLJ
ͻŽŶŽƚĂƚƚĞŵƉƚƚŽƌĞĐŚĂƌŐĞ non-rechargeable batteries with the charger
ͻ/ĨLJŽƵĂŶƚŝĐŝƉĂƚĞůŽŶŐƉĞƌŝŽĚƐŽĨŶŽŶ -use for the tool, it is best to unplug the charger from its power
source
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
ͻŽŶŽƚĐŽŶŶĞĐƚƚŚĞďůƵĞ;сŶĞƵƚƌĂůͿŽƌďƌŽǁŶ;сůŝǀĞͿ wire in the cord of the charger to the earth terminal
of the plug
ͻ/ĨĨŽƌĂŶLJƌĞĂƐŽŶƚŚĞŽůĚƉůƵŐŝƐĐƵƚŽĨĨƚŚĞĐŽƌĚŽĨƚŚĞ charger, it must be disposed of safely and not left
unattended
GB
Cordless drill/driver MPCD14VDQF/2 User Manual