MaxPro MPCD12VDQF/2, User Manual

Page: 10 / 93

10
CLEANING AND MAINTENENCE
Make sure that the machine is not live when carrying out maintenance work on the motor.
These machines have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and regular cleaning.
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly clean the
machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and
dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as
petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please contact the service address on the warranty card.
ENVIRONMENT
ͻ Do not dispose of electric tools, accessories and packaging together with household waste material
- in observance of European Directive 2002/96/EC on waste of electric and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility
TROUBLE SHOOTING
Fault Symptom Possible Cause Troubleshooting
1 Out of service
Insufficient charging capacity in
accumulator Replace fully recharged
accumulator
Accumulator damage Replace accumulator
Motor wearout
Replace electric motor by
repairer
Switchboard damage Replace switchboard by repairer
2 Insufficient running
Insufficient charging capacity
Replace fully recharged
accumulator
Damage in gear wheel Replace gear wheel by repairer
Motor wearout
Replace electric motor by
repairer
3 Running noise frequently
Wearout of motor gear wheel Replace gear wheel by repairer
Fracture in gearing box
Replace gearing box by repairer
4 Drill chuck in loosening Drill chuck in wide loosening Replace drill chuck by repairer
5
Failed to reach full charging
capacity
Disconnection between plug and power
socket
Put plug in power socket
Shortcircuit in supply power
Repair supply power
Fuse blowout or damage in electricity
charger Repair or replace electricity
charger
Accumulator damage Replace accumulator battery
6
Spare parts list and drawing Please download files on
www.maxpro-tools.com
GB
Cordless drill/driver MPCD14VDQF/2 User Manual