MaxPro PROFESSIONAL 113-020, Manual

Page: 13 / 50

10 GB
implementa in accordance with na law, electric tools that have reached the end of their life must
be collected separately and returned to an environmentally compa recycling facility
TROUBLE SHOOTING
Fault Symptom Possible Cause Tr
Electric motor out of
service
Disc etween plug and power
socket
Put plug in power socket
shortcircuit in power supply Repair and rec
At switch-o ff Switch on
Loose switching contact Replace switchboard by repairer
Burnout of stator coil Replace stator by repairer
Stator wiring disc Rec by repairer
tripout due to improper closing of movable
guard
Shut down movable guard again
Electric circuit disc Check electric circuit c by
repairer
Sluggish start-up of
electric motor, falling
short of running speed
Unsmooth running in mechanical part Check mechanical part by repairer
Burnout of switching contacts Repair or replace switchboard by
repairer
Capacitor damage Replace capacitor by repairer
Low supply voltage Regulate supply voltage
Excessive running noise Electric motor at fault Check motor by repairer
Stopover in mechanical running gear or
damage in bearing
Check mechanical part by repairer
Severe wear in bearing or edge Replace bearing, stator or rotor
stator/rotor
Failed to reach full
power
Electrocircuit overload due to ligh
de
appliances
electric appliances on machine-
connected electrocircuit
Failed to reach rated
power
Electromotor overload Overload prot
Insu fficie nt motor cooling Dedust electric motor
Bearing overhea to de ficie nt
lubrica excessive thick lubrica
or bearing full of grease stain
Supplement or replace lubrica
and clean up bearing
Stopover or damage in bearing Replace bearing by repairer
Damage in capacitor Replace capacitor by repairer
Excessiv ht in belt Properly regulate belt
Substandard auger
boring quality
Wearout of drilling bit Replace drilling bit
Improper adjustment of driving belt Readjust driving belt
Driving blet tensile elonga
speed drop due to wearout in driving belt
Replace driving belt
Wearout of driving belt or belt fracture Replace driving wheel or driving belt
Disc etween drill chuck and
main drilling spindle
Re fi