MaxPro PROFESSIONAL 113-0000, Manual

Page: 6 / 68

5 GB
• Guide the workpiece only against the switched-on machine and do not switch the machine o ff un til a ft er
having removed the workpiece. The workpiece can move suddenly.
• Never apply the workpiece laterally against the rota ting grinding wheel, and always grind from the front.
The workpiece can be drawn out of your hand through the rota tiona l mo ti on of the grinding wheel and
lead to injuries.
• N ever reach into the running grinding wheel of the machine.This can lead to serious injuries.
• Do not stop coas ting grinding wheels by applying lateral pressure to them. The workpiece can be drawn
out of your hand through the rota tional motion of the grinding wheel and lead to injuries.
• Wear a work apron. Pay a tt en tion th at other persons are not put at risk from sparking. Remov e flammabl e
materials in close vicinity. Sparking occurs when cu tting m etal.
• Keep your workplace clean. Blends of materials ar e particularly dangerous. Dust from light alloys can burn
or explode.
Products sold in GB only: Your product is fitt ed with an BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut o ff and an
appropriate plug fitt ed in its place by an authorized customer service agent. The replacement plug should
have the same fuse ra ting as the original plug. The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30
mA or less.
OPERATING INSTRUCTION
1.Moun ting the machine (fig. A)
The machine must be screwed to a workbench. Mark the posi ti on of the moun ti ng holes (8) on the
workbench. Drill holes at each of the marked position, adjus ting the diameter and depth of the holes to the
screws used. Place the machine on the workbench and insert the screws into the moun ting holes. Firmly
tig hten the screws. Replacing a grinding wheel (fig. A & B) Remover the wheel guard (3). Loosen the nut (11).
The nut on the right spindle has a right thread, the nut on the le ft spindle a le ft thread. Remove the outer
flan ge (12) and the old grinding wheel (2). Clean the flan ges (12 & 13). Place a new grinding wheel with
specified size. Fit supplied adaptor fi rst if the wheel bore size is 32mm. Place the outer flan ge against the
grinding wheel and place the nut onto the spindle. Secur ely tig hten the nut. Replace the wheel guard.
Alw a y s unplug the t ool b e for e r eplacing a grinding wheel.
N e v er use a c r ac k ed grinding wheel. Immediately r eplace a c r ac k ed grinding wheel.
A c r ac k ed grinding wheel ma y br eak into pieces when used and cause accide n ts.
2.Moun ting and adju s ting the spark gua r ds (fig. A)
You must regularly adjust the spark guard in order to compensate the wear of the grinding wheel. Mount
the spark guard (4) to the wheel guard (3) using the screw (9) (refer to the figu re). Adjust the distance
between the spark guard and the grinding wheel (2) to the smallest possible value, with a maximum of 2
mm. Tighten the spark guard screw. Slide the screen (5) to the front. Tighten the nut (10).
The spark gua r d p ro tects your e y es and hands f r om spar k s flying f r om the w ork piece.
The r e for e, al w a y s use the spark gua r d.
3. Adju s ting the w ork piece supports (fig. A)
You must regularly adjust the work piece supports in order to compensate the wear of the grinding wheels.
Loosen the adjus ti ng screw (7). Adjust the distance between the work piece support (6) and the grinding
wheel (2) to the smallest possible value, with a maximum of 2 mm.
Tighten the adjus ting sc rew.