7
Chapter 2 General Safety Information
NOTE :
◎
This product is classified as a Class IV laser product. This product emits
light with a wavelength of about 1064nm up to 5W / 10W / 20W / 30W / 50W /
70W, which is not in the visible range, but these beams may cause irreversible
damage to the retina and cornea. Chuangxin Laser recommends that you always
wear qualified and safe protective glasses when operating the laser.
2-Laser Protection
1.Laser Protection Requirements
You must wear the safety protective glasses while operating the laser, and
rationally select the safety protective glasses according to the lasing wavelength
of the laser. If the device is a tunable laser or Raman product, it emits light
over a range of wavelengths and the end user should confirm the laser safety
eyewear used protects against light emitted by the device over its entire range of
wavelength.
2.Laser Protective Equipment Suppliers
Maxphotonics recommends material or equipments provided by following laser
protective equipment suppliers for you, including LaserVision USA, Kentek
Corporation, Rochwell Laser Industries, etc. All the supplier information is
provided by Maxphotonics only for the convenience to use, so Maxphotonics
assumes no responsibility for any problem caused by using the products of
abovementioned suppliers.
3-General Safety Instructions
In order to ensure the safe operation and optimal performance of the product,
please follow these warnings and cautions in addition to the other information
contained elsewhere in this document.
