MULTIMAX USER GUIDE 91
Chapter 5. Introductions for CLI
5.1 What’s CLI and hierarchy level Mode
The MA-2040 command-line interface(CLI) is a software interface providing our another
way to set the parameters of equipment from the console or through a telnet network
connection. Before using them better a few of details will be introduced on four different
CLI hierarchy level modes which have different access rights:
l
User exec mode—The command prompt “>” shows you are in the user mode , in this
mode user can only use some simple commands to see the current configuration and
the status of the device, or enter the “ping” command to troubleshoot the network
connectivity.
l
Privileged exec mode—When you enter privileged mode ,the prompt will change to
“#” which user can do not only what is allowed in the user exec mode but also the new
additions like importing and exporting for files , system log , debug and so on .
l
Global configuration mode—The global configuration mode with prompt “<config>#”
allows user to add, set, modify and delete current configuration.
l
Interface mode—Prompt “<config-xx>” means in this mode we can set both IP address
and mtu for this interface.
Following is a relationship diagram about how to access or quit among the different
modes:
USER EXEC MODE:
MA-2040 Configure Environment
Username: admin
Password: *****
MA-2040> ? //check what commands can be used in
user exec mode
Enable
Turn on privileged commands
Exit
Exit from current mode
Ping
Ping test
Reload
Halt and perform a cold restart
Tracert
Tracer test
Show
Show running system information
Summary of Contents for MULTIMAX MA 2040
Page 1: ...Dual Port Dual SIM Industrial Cellular Router User Guide V1 01...
Page 44: ...MULTIMAX USER GUIDE 43...
Page 88: ...MULTIMAX USER GUIDE 87 The modification will take effect after Apply Save Reboot...
Page 90: ...MULTIMAX USER GUIDE 89 The modifications will take effect after click Apply Save Reboot...
