MDP-6424 Operation
1. Turn on the radio and also the speaker you wish to adjust.
2. There are 2 ways to access the speaker volume adjustment on the radio.
a.
One is by pressing the “menu” button and selecting “Contacts”. Scroll to find all
of the contacts programmed into the radio. Contacts with this symbol,
are
MDS speakers. Next press the
“menu” button again and there you will find 2
options; 1. View Details and 2. MDS Set. Looking at the details will show the
speaker ID of the selected speaker.
“MDS Set” allows you to adjust the volume
level of the speaker. When the level is selected, press the menu button again
to send the information to the speaker.
The radio will show “Send Message”. If
the call is successful, you will hear a 4-tone chime from the speaker.
b.
The other way is to use a predefined button press called “MDS Set (D)”. In this
example we have it programmed on P1. “MDS Set (D)” has 4 settings. Each is
explained below.
1.
MDS ID:
Use the menu button to select MDS ID. There you must enter the
8 digits shown on either the bottom of the speaker itself, or the number
found in the programmer as “Own ID”. The menu button moves the curser
to the next digit while the scroll key changes the number either up or
down. After the 8
th
digit is entered, press the menu button again and this
will return you to the main screen. (At this point you would skip down to
