MDP-6424 Programming & Operation w/ MDS Speakers
Maxon’s MDP-6424 is currently the only radio model available to remotely adjust the
volume of a speaker without the CPS program. Any DMR UHF radio or UHF analog
radio can talk through the speakers, but they cannot adjust the volume.
You will need:
•
Programming cable ACC-3320E
•
MDP-6424 CPS Software will need to be ACC-640 version V2.0.0.6 or higher
•
MDP-6424 Radio firmware version V2.5.1.0 or higher
a.
Using the correct version of software, read the radio. In this example we are
using V2.1.3.2.
Contact Maxon if you need updated software.
b. In the
Settings
menu select
“MDS Set”
as shown.
c. Under
Buttons
, MDS Set (D) can be selected. This allows direct access to
the MDS speaker adjustment. There are 4 options under this menu.
1. MDS ID: Allows the user to manually input the ID of the speaker to be
adjusted.
2. MDS Contacts
: Displays the Call Type “MDS Call” generated in the DMR
Contact list.
3. MDS Volume: Sets the volume level of the speaker.
