2. Use the provided tools for removal of the CB. Place
one on each side of the unit with the notches and
part numbers on the tools facing toward the CB. Insert
the tools and push in until they click and lock, then
gently but firmly pull the CB unit forward (fig. 5).
fig. 5
Under/Over Dash Installation
Under/over dash installation requires the following
provided hardware: U-shaped mounting bracket,
locking washers, retention knobs, microphone hanger
bracket and self-tapping screws.
1. REMOVE the factory pre-installed screws on both
sides of the CB unit (fig. 6).
fig. 6
2. Install one locking washer on each side, with grooves
facing away from the CB unit (fig. 7).
fig. 7
7
