1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
49
2.
Disconnect power to the pump by dis-
connecting negative
(-)
and positive
(+)
cables from battery
(FIG. 49-1)
.
Reinstall nuts on negative
(-)
and
positive
(+)
battery terminals.
POSITIVE (+)
BATTERY POST
NEGATIVE (-)
BATTERY CABLE
NEGATIVE (-)
BATTERY POST
NUT
POSITIVE (+)
BATTERY CABLE
DISCONNECTING BATTERY POWER
FIG. 49-1
WARNING
!
To prevent accidental personal injury
and equipment damage, disconnect
(-) battery cable and (+) cable from
battery.
INSTALLATION WITH UNDERRIDE
1.
Lower platform to ground level. Refer
to operating instructions in
Operation
Manual
.
3.
Bolt opener and license plate
bracket to main frame as shown
in
FIG. 49-2
. Then, torque bolts
and lock nuts to
105 lb-ft
.
BOLTING ON OPENER & LICENSE
PLATE BRACKET
FIG. 49-2
OPENER
LOCK NUT, 3/8”-16
(2 PLACES)
MAIN
FRAME
FLAT WASHER
(2 PLACES)
CAP SCREW, 2-1/4” LG.
(2 PLACES)
STEP 11 - INSTALL OPENER & LICENSE PLATE
BRACKET WITH ICC BUMPER OR UNDERRIDE - Cont’d
Summary of Contents for GPTWR-25
Page 70: ......
