1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
17
3.
Run Control Switch cable under Vehicle Body
(see dashed line in FIG. 17-1A)
and through
the Grommet on the Pump Box. Use 2 loom
clamps and 2 self-tapping screws (Parts Box)
to secure the Control Switch cable to vehicle
frame.
STEP 6 - INSTALL CONTROL SWITCH - Continued
PLATFORM
(OPEN AND RAISED)
3/4” HOLE
VEHICLE BODY
VERTICAL POST
CONTROL SWITCH
CABLE
GROMMET
PUMP BOX
ROUTING CONTROL SWITCH WIRING
FIG. 17-1A
2.
Route the Control Switch cable through the
¾” hole in the Vertical Post
(FIGS. 17-1B)
and down the Vertical Post as shown in
(see dashed line in FIG. 17-1A)
. When
the Control Switch is close to the Post,
attach Control Switch to Vertical Post with
2 self-tapping screws
(FIG. 17-1B)
.
SELF-TAPPING
SCREW
CONTROL SWITCH
DECAL
(SEE DECALS PAGE)
ATTACHING CONTROL SWITCH
FIG. 17-1B
3/4” HOLE
Summary of Contents for GPT Series
Page 1: ...M 99 49 REV K OCTOBER 2005 MAXON Lift Corp 2005 ...
Page 38: ......
