39
CONVENTIONAL MODE OPERATION
SENDING A MANUALLY ENTERED INTERCONNECT CALL,
Continued
At the completion of the call, press and hold the P-T-T and
then press the
PHN
or
#
IND
key (as required by the radio system)
to disconnect from the interconnect facility.
SCAN OPERATION
Only channels that are part of the radio's scan list may be
scanned. Channels are added to the scan list on a per system
basis through PC programming. The scan list is retained in
memory when the radio is turned off. The following is a
description of PC programmable scan features:
Scan Hang Time
: The delay of time the radio waits before
resuming scan after P-T-T is released or after the carrier
has dropped a channel.
TX Select: The
channel the radio will transmit on while
scanning. The radio will be programmed to transmit on
either the scanned channel or the selected channel.
Scan List (privileges):
Pre-programmed list of channels that
may be scanned.
Enable / Disable Scan
To enable scan, press the
SCN
button. The SCAN icon will
display. To disable scan, press and release the
SCN
button.
The SCAN icon will disappear from the display.
Add /Delete Channels
Channels can be added or deleted from the scan list as
needed. NOTE: Scan must be disabled to add/delete a
*
