DISPLAY MESSAGES
During radio operation, various messages are displayed on
the LCD. Typical messages include radio operation (radio
in programming mode) and error messages (radio failure).
MESSAGE
DESCRIPTION
NC
Out of range - no connection between radio
and system site. Incorrect system selected,
radio is out of coverage area, etc.
AGENCY
Indicates an agency call.
ALLCALL
Indicates an all call message.
INDV
Indicates an individual call.
CONV FS
Conventional failsoft - displays when a failure
of the EDACS system occurs. All communica-
tions will be in conventional mode.
PROGRAM Indicates radio is in the programming mode.
SYN LOC
Indicates that the synthesizer is unable to load
and lock on the channel properly.
ALERT TONES
The radio generates a number of alert tones (beeps) to indicate
various events or operating conditions. These alert tones can
be enabled or disabled by programming. Function is described
below assuming tones are programmed.
Power-up:
A single tone will sound on power-up after the radio
passes a self test.
Carrier Control Timer:
If the programmed time for continuous
transmission is exceeded, five short high-pitched warning
tones followed by a single, long low-pitched tone will be
heard. The transmitter will shut down shortly after the alert
10
