25
GE-MARC OPERATION
TURNING ON THE RADIO
Rotate the power on/off-volume control clockwise, out of
detent, to turn on the radio. A short beep (if enabled through
programming) indicates the radio is ready for operation. The
display indicates the last selected system/area and group.
RECEIVING A CALL
Turn on the radio and adjust the audio level. Select the desired
area (system) by pressing the
SYS
button and then using the
!"
and
#
button to scroll to the desired area. Only areas pro-
grammed can be selected.
Select the desired group by pressing the
!"
and
#
button to
scroll to the desired group. Only groups programmed can be
selected. The radio is now ready to receive calls.
NOTE:
To move quickly through area /system or group selec-
tions.
Individual Call:
If an individual call (call directed only to
your radio) is received, the radio unsquelches on the assigned
group. The BUSY icon will light. If programmed on, the
individual call received tone (one high-pitched followed by
one low-pitched tone) will sound and the originator's ID or
just "ID" (dependent upon programming) is displayed for
a short time.
To answer the call, press the P-T-T button and begin talking
if caller's ID is still in display. If the caller's ID is no longer
in the display, press the
SPC
button to display the caller's ID,
then press P-T-T and begin talking.
