Maintenance
«EC frameless DT» Installation Manual
mmag | 2021-12 | rel10341
4-25
4
MAINTENANCE
4.1
Periodic Inspection
The «EC frameless DT» as a whole and its individual parts are maintenance-free.
Outer body, motor shaft, and bearings are customer-made parts. For their maintenance and repair consult
the relevant instructions. Thereby observe the following:
If you perform
maintenance on
outer body, motor
shaft, and bear-
ings:
•
Before you start: Be aware of the necessary safety precautions (
page 5) and strictly follow the
general rules (
•
Verify the correct position of the motor before re-commissioning.
4.2
Storage
Observe all safety aspects (
“About the Safety Precautions” on page 5) and the stated environmental con-
ditions (
Physically separate the storage location to prevent all persons who possibly may suffer impairment caused
by strong magnetic fields from approaching the device and force them to stay clear in a safe distance of at
least two (2) meters. Put up warning signs stating STRONG MAGNETIC FIELDS.
4.3
Decommissioning & Dismantling
Dismantling follows basically the Installation in reverse order (
chapter “3.2 Design Guidelines” on
page 14). Be aware of the necessary safety precautions (
page 5) and strictly follow the general rules
(
page 12).
4.4
Disposal
In no case dispose used components with normal domestic waste.
Dispose used components only via official collection sites or a certified recycling company. Draw to atten-
tion that the high magnetic forces produced by the device constitute an imminent hazard to persons wearing
a cardiac pacemaker or metal implants.
