Maxon EC frameless DT, Installation Manual

Page: 21 / 35

Installation
Electrical Installation
«EC frameless DT» Installation Manual
mmag | 2021-12 | rel10341
3-21
Figure 3-9 Encoder connector with axial cable outlet (732076)
Table 3-13 Pin assignment – Encoder connector with axial cable outlet
Table 3-14 Encoder connector with axial cable outlet
Pin Signal Description
1
NTC − Thermistor − (  “Encoder: Thermistor (NTC)” on page 23)
2
NTC+ Ther (  “Encoder: Thermistor (NTC)” on page 23)
3
— do not connect
4
H3 Hall sensor 3
5
H2 Hall sensor 2
6
H1 Hall sensor 1
7
— do not connect
8
— do not connect
9
B Channel B
10
B\ Channel B complement
11
A Channel A
12
A\ Channel A complement
13
GND Ground
14
Vcc Power supply voltage (+4.5…+5.5 VDC)
TSX MAG encoder connector with axial cable outlet
(732076)
Connector Molex PicoClasp (501331-1407)
Suitable cable
TSX MAG to EPOS4 (708583), L=300 mm
TSX MAG to ESCON (708584), L=300 mm
Suitable plugs
Housing
Connector housing, 1.0 mm pitch 1.0 mm, 14-pole;
Molex Pico-Clasp (5013301400)
Contacts Crimp contact, 28-32 AWG; Molex (5013340100)