background image

2

Replace if necessary. 

Recommended checks and maintenances every year: 

1.  Oil change. 

Clean oil suction filter and air breather filter. 

Fill up with recommended oil.

2.  Hydraulic hoses. 

Change every four  years, or if damages appear. 

3.  Electric motors. 

Check carbon brushes, and clean with compressed air. 

4.  Check battery voltage. 

Measure acid density. 

Clean cable connections at the battery. 

5.  Load test. 

Function test with nominal load. 

6.  Check foot controls 

If necessary renew the switch or the rubber. 

       7.   Check mechanical components for cracks or deformation.

Any failure must be repaired immediately and any missing part is to be replaced at once! 

The vehicle operator is responsible for repairs in due time of known damages 

The operating instructions are to be carried in the vehicle at all times. 

Annual verifications 

The Slidelift is to be verified by an expert once a year after its first operation. The results of that 

verification must be written down in the control book. 

Battery capacity 

When driving short distances, always choose higher battery capacity. 

Reinforced alternators are always recommended 

The operator is responsible for battery capacity and its loading condition 

Lifting

capacity 

4,400 lbs 

5,500 lbs 

Battery - 

Size

Group 31 to Battery

RECOMENDACIONES

Summary of Contents for 55X1


















Reviews: