maxon motor
4
maxon motor control
1-Q-EC Amplifier DEC Module 50/5
Operating Instructions
April 2015 Edition / document number 1094861_PDF_E - 05 / subject to change
2.11 Standards
The described device has been successfully tested for compliance with the
below listed standards. In practical terms, only the complete system (the fully
operational equipment comprising all individual components, such as motor,
servo controller, power supply unit, EMC filter, cabling etc.) can undergo an
EMC test to ensure interference-free operation.
Important Notice
a
The device’s compliance with the mentioned standards does not im-
ply its compliance within the final, ready to operate setup. In order to
achieve compliance of your operational system, you must perform EMC
testing of the involved equipment as a whole.
Electromagnetic compatibility
Generic
standards
IEC/EN 61000-6-2
Immunity for industrial environments
IEC/EN 61000-6-4
Emission standard for industrial environ-
ments
Applied
standards
IEC/EN 61000-6-4
EN 55011
(CISPR11)
RF disturbances
IEC/EN 61000-4-3
Radiated electromagnetic field > 10V/m
IEC/EN 61000-4-4
Electrical fast transient burst +/- 2 kV
IEC/EN 61000-4-6
RF conducted disturbances 10Vrms
IEC/EN 61000-4-8
Power frequency magnetic field 30A/m
Others
Safety
standards
UL File Number E172472, E92481 or E76251; unassembled
printed circuit board
Reliability
MIL-HDBK-217F
Reliability prediction of electronic equipment
Environment: Ground, benign (GB)
Ambient temperature: 298 K (25°C)
Component stress: In accordance with cir-
cuit diagram and nominal power
Mean Time Between Failures (MTBF):
1‘434‘315 hours
