Maxlogic ML-121X, Operating And Maintenance Manual

Page: 9 / 36

KK-641.002 Rev.No:1 01.08.12 ML-121X User Manual Page | 9
More Fires : Among existing events, if there are more than one fire event, this
button is used to see fire events in the system.
The latest fire event remains at the bottom of the LCD screen. Pressing
‘More Fire’ button
shows all the fire events at the upper part of the LCD screen.
Z o n e s I n A l a r m : 1 A l a r m : 2 F a u l t : 1
* F I R E : M G 6 2 0 8 8 - W a y S w . M o n . Z o n e : 1 *
P : 0 L : 1 A : 2 8 M L - 1 2 X X R e - i n i t i a t e d
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
* F I R E : M G 6 2 0 8 8 - W a y S w . M o n . Z o n e : 1 *
P : 0 L : 1 A : 2 8 M L - 1 2 X X R e - i n i t i a t e d
More Events : If more than one event occurs, it is possible to see all other events by
pressing this button. Pressing this button categorizes the events. It is possible to check other
events by pressing
‘1(UP)’, ‘3(DOWN)’ buttons. To see the desired event category, press the
button with number
‘2 (RIGHT)’. To get back to the main category press ‘EXIT’ button.
Event categories as below;
Fires Tech. Alarms Announce Event Informations
Evacuates Tech. Faults FF Tel. Event Disablements
Faults Alerts Analog Event Test
Pre-Alarms Securities Internal Events
Direction buttons:
Button number
‘1’ :
It is used to go upward in the pane
l’s main menu screen and in the
‘More Events’ menu.
Button number
‘2’ :
It is used to select the desired feature in pane
l’s main menu and
desired category in
‘More Events’ screen and go to right direction.
Button number
‘3’ :
It is used to go downward in the pane
l’s main menu screen and More
Events menu.
Button number
‘4’ :
It is used to go back to previous menu and go to left direction.
Enter : Enter Button is used to see the menu screen and select the desired
feature inside the menu.
Exit : It is used to go back to previous menu when LCD screen shows main
panel menu or go back to categories menu from the selected category.
Note: Menu features are described in detail in the 11
th
section of Panel menu. To see the
transitions among menu features please check ANNEX-E Scheme of Menu Functions.
W/Dog Reset : Used for elimination error in case of
‘System Fault’ LED illuminates.
However, if the LED illuminates because of any fault in the central microprocessor preventing
the program to run; the button will be useless for this situation (ANNEX-B, Figure-9).
Microprocessor Reset: Microprocessor can be reset by pressing the
‘Microprocessor Reset’
button. (ANNEX-B, Figure-13)
LCD Lighting : Used to adjust the LCD display contrast with the aid of trimpot
(ANNEX-B, Figure-10).