Mounting Instructions
CAUTION: Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
Operating Instructions HL Series
MaxLite LED Linear HighBay Fixtures
®
Locate the secure threaded stem/pole and
inspect for damage. Using the cord grip
provided, securely attach the input wires
onto the cover plate, as shown in
Fig. 1
.
Mono-Stem Mount:
© Copyright 2018. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: [email protected]
Page: 4
REV: 08/13/18
Attach the base bracket onto the fixture by inserting four (4)
M4 screws, as shown in
Fig. 2
.
Secure the top mounting bracket onto the
stem/pole by placing one (1) nut before
installing the bracket and one (1) nut after,
as shown in
Fig. 3
.
Slide the assembled fixture onto the top mounting bracket
attached to the stem/pole. Secure the fixture to the bracket
using the two (2) screws shown in
Fig. 4
. Wire the input
wires to the fixture.
Attach the cover plate by tightening three
(3) M4 screws as shown in
Fig. 5
.
