8
14)
Volume control
Your Loopset has 9 pre-set volume levels. The VOLUME UP and VOLUME DOWN
buttons are used to increase or decrease the volume of your Loopset output to the hearing
aid. These buttons operate incrementally, i.e. in order to move from level 1 to level 10 you
must press the VOLUME UP button momentarily 9 times. Pressing and holding the
VOLUME UP button will NOT increase the volume to maximum level, it will only increase
the volume by 1 increment. The VOLUME DOWN button operates in a similar manner
except that pressing and holding the VOLUME DOWN button is used to activate the Last
Number Redial function (see paragraph 13). You may also use your phone’s volume up /
down buttons to adjust the Loopset output volume.
NOTE: These volume controls ONLY change the volume of the Loopset/phone combination
output to the hearing aid. They DO NOT change the volume setting of the hearing aid itself.
If you experience problems with the volume level, please adjust the volume control on your
hearing aid to an appropriate level.
15)
Power saving mode
If your Loopset is out of range of your phone for an extended period, your Loopset will
enter power saving mode and turn itself off to conserve battery power. To re-establish
connection, return your phone within range of your Loopset and press the TALK button.
