3
3) System Requirements
In order for your Loopset to function correctly, you must have a Bluetooth enabled mobile
telephone and your hearing aid must be equipped with a Telecoil switch (‘T switch’).
4) Charging the re-chargeable AAA battery
a)
Place the battery in the charger ensuring that the polarity is correct in accordance with
the markings.
b)
Slot the charger into an empty USB port on your computer and ensure that the computer
is turned on. Whilst the battery is charging the light will glow
RED
. When the battery is
fully charged the light will fade and go out.
5)
Installing the battery in the Loopset
a)
Open the battery cover by sliding back the black coloured cover marked ‘Bluetooth’
away from the direction of the LED. Lift off the battery cover.
b)
Insert the battery into the Loopset ensuring that the polarity is correct in accordance with
the markings.
c)
Replace the battery cover in reverse order to opening.
