5
auto-learning function.
z
MINI desktop steel structure, external Power
supplier.
2. Installation
TEG1005/1008 Switch support the desktop
installation, please prevent the crash with other
hard objects from the case being scraped. Please
be careful the following during the installation:
¾
Don’t put heavy article in the switch.
¾
Convenience receptacle and equipment
should be within 1.5 meters.
¾
Check power supply is confirmed the safe
Connection.
¾
Make sure there
’
s enough ventilation
through whom can dissipate heat well.
2.1 Switch to PC
A PC can be connected to the TEG1005/1008
switch via Category 5/Cat5E UTP/STP cable,
because the switch has the MDI/ MDI-X function.
PC can connect any port of the TEG1005/1008
via Parallel or crossing cable without necessity of
distinguishes of Parallel and Crossing cable.
2.2 Switch to HUB
A 10Base-T/100Base-TX HUB can be connected
to the TEG1005/1008 Giga Switch via Cat5/Cat5E
UTP/STP cable, because the Giga switch has the
MDI/ MDI-X function, you can connect any port of
the Giga switch from the Uplink port (MDI-II) of
the HUB or the other ports via parallel/crossing
cable.
2.3 Switch to Switch
Similar to the connectivity between the HUB and
Switch, you can uplink from any port of the Giga
switch to any port of the other switch via
Cat5/Cat5E STP/UTP cable.
Notice: The TEG1005/1008 Giga Switch have
auto-negotiation function, the port indicator
situation dependents on the work mode
