9
:
Step 4
Assembly Instruction
a.
Carefully slide 14PCS Weight stacks
(69)
Weight stem (
68)
down to the Guide rods
(22).
down Guide rods
(22).
When using
: Select the desired training weight
Important:
The deep grooves on the Weight by inserting the Weights select pin
(41)
into the
stacks
(69)
MUST
all face the back of the deep grooves under the Weight stacks and into
assembly and be on the underside. the Weights select rod
(23).
b.
Insert the Weights select rod
(23)
down
When not in using:
Insert the Weight select pin
through the center hole of the Weight stacks
(41)
into the lock ring on the U-shaped bracket
(69). Ensure the pin of the Weights select rod
(30).
(23)
is on the notches of the top weight stack. .
Attach the “Rings” of Weight select pin
(41)
to
Note:
Each Weight stack approximately 4.5Kgs
the top of the Weights select rod
(23).
Slide Refer the weight resistance chart on Page 37
Summary of Contents for 335 / 8687
Page 5: ...4 Components parts...
Page 6: ...5 Components parts...
