9
8
CAUTION!
Potential hazard that may result in injury or damage to
equipment.
NOTE:
Recycle unwanted materials rather than disposing of
them as waste. Sort the tools, hoses, and package in specific
categories and take to the local recycling centre, or dispose
of them in an environmentally safe way.
CAUTION!
Potential hazard that may result in moderate injury or
damage to equipment.
• Do not wear watches, rings, bracelets, or loose clothing when using
any air tool.
• Keep proper footing at all times in order to ensure correct balance.
• For optimal safety and tool performance, inspect the tool daily in
order to ensure free movement of the trigger, safety mechanisms, and
springs.
• Keep the work area clean. A cluttered or dirty workbench may lead to
an accident. Floor should be kept clear.
• This tool is not a toy. Use it with caution.
• Handling and storage of oil: Use with adequate ventilation. Avoid
contact of oil with eyes, skin and clothing. Avoid breathing spray or
mist. Store in a tightly closed container in a cool, dry, well-ventilated
area free from incompatible substances.
• Do not use the tool near or below freezing temperatures, as doing
so may cause tool failure.
• Do not store the tool in a freezing environment to prevent ice
formation on the operating valves of the tool, as doing may cause
tool failure.
Disconnect the tool from the air supply and turn off
the compressor before changing accessories, before
servicing any type of tools, when the tool is not in
use, when it is being handed to another person, and
when it is left unattended. Failure to comply may
result in injury or damage to equipment.
Use safety goggles and ear protection:
Wear safety glasses with side shields when
operating the tool/compressor and verify that
others in the work area are also wearing safety
glasses. Safety glasses must provide
protection from flying particles from the front
and the sides. Air-powered tools are loud and the
sound can cause hearing damage. Always wear
ear protection to help prevent hearing damage
and loss. Failure to comply may result in
moderate injury.
• Always ensure that accessories are rated/designed for use with the
tool.
• Ensure that accessories are correctly and securely fastened before
connecting the tool to an air supply. Failure to comply could result in
serious injury or loss of life.
• Locate the compressor in a well-ventilated area for cooling, at a
minimum of 12" (31 cm) away from the nearest wall.
• Protect the air hose and the power cord from damage and puncture.
Inspect them for weak or worn spots every week, and replace them if
necessary.
• Always wear hearing protection when using the air compressor.
Failure to do so may result in hearing loss.
• Do not carry the compressor while it is running.
• Do not operate the compressor if it is not in a stable position.
• Do not operate the compressor on a rooftop or in an elevated
position that could allow the unit to fall or be tipped over.
• Always replace a damaged gauge before operating the unit again.
model no. 058-9367-8 | contact us 1-888-670-6682
TM
