TM
15
INTENDED USE
The machine is intended for ripping and cross-
cutting wood in straight cutting lines and with
bevel angles to 56°, while resting firmly on the
workpiece.
CHANGING THE SAW BLADE
•
Before starting any work on the machine
itself, unplug the saw.
•
Wear protective gloves when mounting the
saw blade. Danger of injury when touching
the saw blade.
•
Only use saw blades that correspond with
the characteristic data given in the operating
instructions.
•
Do not under any circumstances use grinding
discs as the cutting tool.
For changing the cutting tool, it is best to place
the machine on the face side of the motor
housing.
REMOVING (Fig. A)
Press the spindle lock button (3) and keep it
depressed.
•
The spindle lock button (3) may be actuated
only when the saw blade is at a standstill.
Loosen the blade bolt (18) with the spanner (19).
Remove the outer flange (17). Tilt back the lower
blade guard (9) and hold it firmly with the lower
guard lever (11). Remove the saw blade (16).
MOUNTING
Clean the saw blade and all the clamping parts to
be assembled. Tilt back the lower blade guard (9)
and hold it firmly with the lower guard lever (11).
Place the saw blade onto the inner flange (15).
Assemble the outer flange (17) and the blade bolt
(18). Use the wrench (19) to tighten the bolt (18)
with 1/4 turn more than finger tight.
•
Take care that the mounting positions of the
OPER
A
TING INS
TRUCTIONS
NOTE:
Before using the tool, read the instruction book
carefully.
Fig. A
