17
TM
CUTTING GUIDE (Fig. D)
The sight line (7) fixed in front of the base plate
is used as a cutting guide. Always guide it along
the cutting mark made on the workpiece for
accurate cutting.
The cutting mark 0° indicates the position of the
saw blade for right-angled cuts.
SWITCHING ON AND OFF
Depress the on/off switch (1) to start the saw and
release to stop.
For safety reasons the on/off switch (1) of
the machine cannot be locked; it must remain
pressed during the entire operation.
OPER
A
TING INS
TRUCTIONS
7
Fig. D
