14
model no. 054-7556-8 | contact us 1-888-670-6682
VARIABLE-SPEED DIAL
(fig 6)
The variable-speed feature on this sander
allows you to match the proper speed to
the material being sanded.
1. The variable-speed dial is used to
adjust the speed of the application
tool.
2. Turn the dial to increase or decrease
the speed of the tool.
3. Position “0” selects the slowest speed; position “5” selects the fastest speed.
Adjust the speed for optimum performance.
SANDING
This sander can be used for most sanding operations on materials such as wood,
plastic, metal and painted surfaces. Do not use the sander for wet sanding.
1. Plug the sander into the power source.
2. Place the sander on the workpiece so that the sandpaper disc is fully in
contact with the workpiece.
3. Start the sander.
4. For best sanding results, apply light pressure on the sander, but do not force
the tool.
5. Move the sander slowly over the workpiece, making successive passes in
parallel lines, circles, or crosswise movements. The removal rate and the
sanding pattern are determined by the choice of sandpaper disc and the work
surface.
6. Do not allow the sander to stay on one spot for too long, as the sander’s rapid
action may remove too much material and make the surface uneven.
7. Upon completion of the sanding operation, remove the sander from the
workpiece, turn the sander off, and wait until it comes to a complete stop
before putting it down.
OPER
A
TING INS
TRUCTIONS
fig 6
Variable-speed dial
