11
OPERATION INSTRUCTIONS
ATTACHING SANDPAPER
DISCS
(fig 1)
1. Disconnect the sander from the power
source.
2. Place the sander upside down on a flat
surface.
3. Remove any dust or debris from the
sanding pad.
4. Align the holes of the sandpaper disc
with the holes in the sanding pad and firmly press the sandpaper disc against
the sanding pad to ensure a good attachment.
SELECTING THE RIGHT GRADE OF SANDPAPER DISC
1. Different grades of sandpaper discs can be purchased from the store where
you purchased the tool.
2. Available grades are: coarse, medium and fine.
3. Use a coarse grit to sand down rough finishes, medium grit to smooth the
work and fine grit for finish sanding.
4. It is best to make a trial run on a scrap piece of material to determine the
optimum grades of sandpaper disc for a particular job.
OPER
A
TING INS
TRUCTIONS
WARNING!
• Never connect the sander to the power source when you are
assembling parts, making adjustments, installing or removing the
sandpaper disc, cleaning, or when it is not in use. Disconnecting the
sander will prevent accidental starting, which could cause serious
personal injury.
FPO
fig 1
