15
MAINTENANCE
The tool may be cleaned most effectively with compressed dry air. Always wear
safety goggles when cleaning tools with compressed air. Before each use:
• Inspect the corded random orbit sander, the switch, and the pad.
• Check for damaged, missing, or worn parts.
• Check for loose screws, misalignment or binding of moving parts, or any other
condition that may affect the operation.
• If abnormal vibration or noise occurs, turn the tool off immediately, and have
the problem corrected before further use.
MAINTENANCE
WARNING!
• To avoid accidents, always disconnect the tool from the power
supply before cleaning or performing any maintenance. The tool
may be cleaned most effectively with compressed dry air. Always
wear safety goggles when cleaning tools with compressed air.
• Do not let brake fluids, gasoline, petroleum-based products,
penetrating oil, etc. come into contact with plastic parts. These
substances contain chemicals that can damage, weaken, or destroy
plastic.
• When servicing, use only identical replacement parts. The use of any
other parts may create a hazard or cause damage to the product.
• Use only accessories that are recommended for this tool. Accessories
that may be suitable for one tool may become hazardous when used
with another tool.
• To ensure safety and reliability, all repairs should be performed by a
qualified service technician.
FPO
