19
IMPORTANT:
When vacuuming large quantities of liquids, do
not immerse the nozzle completely in the liquid; leave a gap at the
tip of the nozzle opening to allow air inflow. The machine is fitted
with a float valve that stops the suction action when the collection
tank reaches its maximum capacity. You will notice an increase in
motor speed. When this happens, turn off the machine, disconnect
from power supply, and drain the liquid into a suitable receptacle
or drain. To continue vacuuming, refit the power head to the
collection tank. After wet vacuuming, turn the machine off and
remove plug from power supply. Empty the collection tank, clean
and dry the inside and outside before storage.
REMEMBER!
The foam wet filter must be removed after wet
vacuuming and the HEPA cartridge filter must be installed before
dry vacuuming again.
WET V
A
CUUM OPER
A
TION
Verify that the switch is in the ‘O’
OFF position before plugging the
power cord into the power outlet.
Plug the power cord into the outlet.
Once you have completed vacuuming,
flip the switch to the 'O' OFF position
and unplug the power cord from the
outlet. After use, drain liquids into a
suitable receptacle or drain. Rinse,
clean, and dry the inside and outside
of the collection tank.
Turn the motor on by flipping the
switch to the ‘I’ ON position.
4
6
5
Summary of Contents for 054-0338-0
Page 1: ...30 L 8 U S Gallons HEPA Wet Dry Vacuum 054 0338 0 ...
Page 2: ......
